Compass Go by Meyer Sound4.16.2 - App Store

Compass Go by Meyer Sound is an iPad app designed for audio professionals who are using Meyer Sound’s Compass, GALAXY, Galileo or Callisto processors. For more information on Meyer Sound’s new Galileo GALAXY Network Audio Processor, please visit https://meyersound.com/product/galileo-galaxy/ .

Compass Go by Meyer Sound complements the full feature set of the original Compass software for controlling Meyer Sound GALAXY, Galileo and Callisto processors. Compass Go is a dedicated application that will easily connect to any single GALAXY, Galileo or Callisto processor and take advantage of all available controls on the processors including, Parametric EQ, U-Shaping, TruShaping, Delay, Gain, Mute and Meters.

Compass Go by Meyer Sound offers a more portable control solution that allows the operator to make changes while moving rapidly through different listening areas and seating locations to analyze by ear the overall effectiveness of the sound system with respect to coverage and quality. For mission critical control during a show a wired interface should always be active, but during setup and adjustment the use of Compass Go by Meyer Sound speeds the workflow considerably.

Compass Go’s workflow lets you instantly access and see what adjustments you’ve applied at any control point, so you can easily edit, save, and recall snapshots of user settings that are stored on the local device. Compass Go by Meyer Sound can be used for a wide range of sound reinforcement applications including:
. Theme parks
. Touring/Live Sound
. Planetariums
. Cinema
. Commercial/Industrial installations
. Theatrical Productions
. Corporate AV
. Houses of Worship
. Location-Based Entertainment

Simply connect the app to a Galileo GALAXY, Galileo or Galileo Callisto processor on the same Wi-Fi network, and you can seamlessly and accurately optimize your sound system using the following features in any of the Meyer Sound Galileo digital processors:

. Adjust system delay, gain, and mute
. Manage Meyer Sound shaping EQ, and parametric EQ filter sets
. See current parameters status and any adjustments made at any control point
. Recall snapshots of prior user settings
. Create, edit, and store new snapshot settings in the individual processors
. Move about freely without a laptop as you listen for the array coverage and quality from different seats

The Compass Go by Meyer Sound app for iPad provides an extension to the Compass Control Software desktop/workstation product and enhances the user experience and workflow efficiency. Meyer Sound requires upgrading Galileo or Callisto devices to firmware version 3.12.0 or GALAXY firmware version 2.8.1 before using Compass Go. Please visit https://meyersound.com/product/compass-go/ for more information.

Version History Compatibility with latest operating system 4.16.2 May 21 Support new GALAXY firmware 2.10 4.16.1 Mar 3 Product Integration for X80 and X82 4.15.0 01/16/2025 Compatibility with GALAXY firmware 2.9.0 4.14.0 11/06/2024 Compatibility with GALAXY firmware 2.8.1 2.12.2 05/28/2024 Compatibility with Galaxy Firmware 2.7.0 2.12.1 04/26/2024 Support for Galileo GALAXY processor firmware 2.8.0
Added Low-Mid Beam Control (LMBC) for all PANTHER loudspeaker models
Minor bug fixes 2.12.0 02/15/2024 Compass Go 2.11.0 adds support to the latest GALAXY firmware:
GALAXY Firmware v2.7.0 (All models)
2100-LFC Product Integration Support 2.11.0 07/20/2023 Compass Go 2.10.0 adds support to the latest GALAXY firmware:
GALAXY Firmware v2.6.0 (All models) 2.10.0 10/12/2022 Compass Go 2.9.0 adds support to the latest GALAXY firmware:
GALAXY Firmware v2.5.2 (All models) 2.9.2 04/20/2022 Compass Go 2.8.3 adds support to the latest GALAXY firmware:
GALAXY Firmware v2.4.2 (All models) 2.8.3 10/27/2021 Compass Go 2.8.2 adds support to the latest GALAXY firmware:
GALAXY Firmware v2.4.1 (All models) 2.8.2 08/05/2021 Compass Go 2.8.1 adds support to the latest GALAXY firmware:
GALAXY Firmware v2.4.0 (All models) 2.8.1 04/21/2021 Compass Go 2.8.0 adds support to the latest GALAXY firmware:
GALAXY Firmware v2.3.3 (All models) 2.8.0 01/12/2021 Channel assignments are now visible in dark mode. 2.7.0 10/23/2020 Supported Firmware Versions:
GALAXY v2.3.0 (All Models)
Bluehorn 816 v2.3.0

Firmware NOT Supported in Compass Go 2.6.1
GALAXY v1.3.4 or earlier
Galileo and Callisto v3.12.0 or earlier

Compass Go* Features:
Supports Compass 4.8.0 and higher only.
Added support for Spacemap Mode.

Compass Go AM824*:
Provides legacy support for Compass Version 4.3.X and earlier. This product is a separate App on the iOS App Store.

* Note: CAL and GALAXY installations requiring AM824 AVB stream support must use Compass 4.3.x and Compass Go AM824

Bug Fixes:
Minor bug fix that addresses the metering format.

Please contact Technical Support for more information:
https://meyersound.com/contact/ 2.6.1 07/30/2020 Supported Firmware Versions:
GALAXY v2.1.0 (All Models)
Bluehorn 816 v2.1.0

Firmware NOT Supported in Compass Go 2.6.0
GALAXY v1.3.4 or earlier
Galileo and Callisto v3.12.0 or earlier

Compass Go* Features:
Supports Compass 4.6.0 and higher only.
Renamed GALAXY Delay Integration to Product Integration (includes starting points)
Added support for iOS Files App to save and migrate custom layouts.

Compass Go AM824*:
Provides legacy support for Compass Version 4.3.X and earlier. This product is a separate App on the iOS App Store.

* Note: CAL and GALAXY installations requiring AM824 AVB stream support must use Compass 4.3.x and Compass Go AM824

Bug Fixes:
Minor bugs have been fixed.

Please Contact Technical Support for more information:
https://meyersound.com/contact/ 2.6.0 11/01/2019 • Support for GALAXY Firmware v1.3.4
• Support for Bluehorn 816 Firmware v1.3.4
• UP-4slim Loudspeaker Delay Integration
• Ashby Loudspeaker Delay Integration 2.3.4 12/14/2018 • Support for GALAXY Firmware v1.3.2
• Support for Bluehorn 816 Firmware v1.3.2 2.3.3 06/22/2018 • Low Mid Beam Control (LMBC) for GALAXY devices 2.3.2 03/28/2018 • Bug Fixes 2.3.1 12/19/2017 Support for the 10.5" iPad Pro

Support for GALAXY 1.3.0 firmware:
• Three all pass filters on every output
• Word Clock termination can be set to 75 Ω, 50 Ω and None on the GALAXY 816-AES3

Custom Layouts:
• New resizable Spin Dial control
• The Meter control has been improved and can now show multiple meters in one control
• Device and channel labels can now be hidden
• A long tap on a Response Curve control takes you directly to the processing view for that channel; return to the Custom Layout using the Tools menu

Bug fixes 2.3.0 11/10/2017 Support for GALAXY 1.2.2 firmware:
• Input sharing from one GALAXY unit to other GALAXY units via AVB
• Expanded matrix view with 24 additional AVB inputs and matrix input meters - zoom out with two fingers to see all cross points at once glance
• New Delay Integration settings for LINA and 750-LFC
• SIM3 probe point assignment in Overview
• Default Presentation Time can be adjusted for output AVB streams

Support for Galileo/Callisto 3.12.0 firmware:
• Three all pass filters on every output for standard Galileo 408/616 processors

• Bug fixes 2.2.0 06/08/2017 • Bug Fixes 2.1.1 01/30/2017 • Support for the 12.9" iPad Pro display;
• Custom Layouts now support multiple pages;
• Custom Layouts allow copy and paste of controls;
• Support for the Galileo GALAXY 1.1.0 firmware including internal and external AVB controller mode; 2.1.0 01/14/2017